Introduction to OSHA Answers
Question | Answer |
---|---|
Is Adrian Smith, one of 3 employees of ABC Landscaping, covered by OSHA? | Yes |
Is Taylor Dell, an accountant in business for herself, covered by OSHA? | No |
Is Rob Jones, one of 10 carpenters working for Woody, Inc., covered by OSHA? | Yes |
Why was OSHA necessary? A. Workplace injuries, illnesses and death were increasing B. No uniform or Comprehensive law existed to protect against workplace hazards C. None of the Above D. Both A and B | Both A and B |
What is OSHA’s mission? A. To save lives B. To prevent injuries C. Protect the health of America’s workers D. All the answers are correct | All the answers are correct |
Why is this training important? A. You’ll know your rights if there are hazards in your workplace. B. You’ll know where to get help. C. You’ll know if your employer is complying with OSHA standards. D. All of the answers are correct | All of the answers are correct |
What are some of the things you might find on an SDS? A. Chemical Name B. You’ll know where to get help C. Fire and Explosion hazards D. Precautions for safe use and handling E. All of the Above | All of the Above |
What are some worker rights related to injury and illness reporting? A. Know how to report injuries/illnesses, see the annual summary and review the log B. Right to file a complaint C. Right to participate in an OSHA inspection D. None of the answers | A. Know how to report injuries/illnesses, see the annual summary and review the log |
Some standards or hazards where workers must be trained are? A. Personal Protective Equipment B. Hazards Communication C. Lockout/Tagout D. All the answers are correct | All the answers are correct |
What are some of the responsibilities employers have related to OSHA recordkeeping? A. Must set up a reporting system B. Inform workers of how to report C. Maintain an OSHA 300 Log and make it available to workers D. Post the annual summary E. Report any worker fatalities and hospitalizations to OSHA F. All of the Above | All of the Above |
Which section of the OSH Act prohibits employers from discriminating against workers for exercising their safety and health rights? | Section 11 ( c ) |
What are some types of PPE that employers must pay for? A. Hardhat B. Hearing protection C. Goggles D. Rubber boots with steel toes E. Fire fighting PPE F. All of the above | All of the above |
What is the General Industry Subpart for Personal Protection Equipment? | Subpart I |
What is the General Industry Subpart for Fire Protection? | Subpart L |
What topic does 1910, Subpart G cover? | Occupational Health and Environmental Control |
What are the OSHA Construction standards also called? | Part 1926 |
What are the General Industry standards also called? | Part 1910 |
What are 29 CFR Parts 1915, 1917, and 1918 referred to as? | Maritime Industry Standards |
If a worker files a complaint, if there is a fatality, or if there is an imminent danger situation, OSHA would __. | Conduct an inspection |
What are the types of OSHA violations? A. Willful B. Serious C. Other-Than-Serious D. Repeated E. Criminal/Willful F. All of the Above | F. All of the Above |
What are some resources inside the workplace that will help you find information on safety and health issues? (Select all the answers that apply) | A. Co-workers B. Supervisor C. SDS D. Labels E. Manuals |
What are some resources outside the workplace that will help you find information on safety and health issues? | A. OSHA B. NIOSH C. Community Organizations D. Educational Centers |
OSHA’s mission is to: | Protect the safety and health of America’s workers |
The creation of OSHA provided this important right to workers: | The right to a safe and healthful workplace |
A Safety Data Sheet (SDS) gives information about: | Hazardous Chemicals |
Among the rights related to OSHA recordkeeping, workers have the right to review: | The OSHA 300 Log and the OSHA 300A Summary |
During an OSHA inspection: | You have the right to talk to the inspector privately. |
The right of workers to seek safety and health on the job without fear of punishment is spelled out in: | Section 11(c) of the OSH Act |
One of the main responsibilities employers have under OSHA is to: | Provide training required by OSHA standards. |
OSHA requires that employers pay for most required personal protective equipment (PPE), including: | Hard hats |
The OSHA standards for Construction and General Industry are also known as: | Part 1926 and Part 1910 |
What type of OSHA inspection is conducted when immediate death or serious harm is likely? | Imminent danger |
When the employer receives an OSHA citation, it must be: | Posted for 3 days or until the violation is fixed |
If you feel that an OSHA inspection is needed to get hazards corrected at your workplace, which is your best option? | Submit a written, signed complaint with specific hazard information |
OSHA 10 Final Exam Answers
Question | Answer |
---|---|
What are two US government agencies that are good resources for safety and health information? | OSHA and NIOSH |
OSHA requires fall protection when working near the edge of a trench or excavation that is _ or more in depth. | 6 feet |
Every supported scaffold and its components must support, without failure, its own weight and at least _ the intended load. | 4 times |
During an OSHA inspection: | You have the right to talk to the inspector privately |
The OSHA standards for Construction and General Industry are found in: | Parts 1926 and 1910 |
When the employer receives an OSHA citation, it must be: | Posted for 3 days or until the violation is fixed |
What does OSHA require employers to post for 3 days? | OSHA citations and abatement verification notices |
What section of the OSH Act does the Whistleblower Program reference? | Section 11(c) |
OSHA requires fall protection at different heights for construction and general industry however, regardless of the fall distance, which of the following is most | C. Both A and B are correct |
Employees must not work on scaffold surfaces until: | It is determined to have strength and structural integrity to support intended loads |
From your choices below, what would you consider to be a “major” fall hazard in construction? A. Roof edges and floor openings B. Steel erection C. Improper scaffold construction D. Unsafe use of portable ladders E. All the above | E. All the above |
Climbing on the cross braces of scaffolds is allowed: | Never |
If there are defects found during the inspection of personal fall protection equipment, or if the equipment has been used in an arrest, it must be: | Removed immediately from service |
More than 33% of fatalities in construction are from a combination of falls from: | Roofs |
Examples of fall hazards that have resulted in deaths on the jobsite include: A. Falls to the ground or lower levels B. Falls through existing floor or roof openings C. Falls through the floor or roof surface D. Falls on the same level E. All the above | E. All the above |
How can YOU prevent a fall from a ladder? A. Choose the right ladder for the job B. Tie the top and bottom of the ladder to fixed points when necessary C. Don’t carry tools or other materials in-hand while climbing the ladder D. All the above | D. All the above |
Three major components of a Personal Fall Arrest System (PFAS) include; anchor and the anchorage connector; full body harness; and: | Connecting device (lanyard with shock absorber/retractable lifeline, snap hooks) |
When using scaffolds, make sure there is which of the following? A. Safe and compliant access and egress B. Full planking C. Stable footing D. Guard railing E. All of the above | E. All of the above |
Preventing fall hazards is a critical part of the construction planning process. Controls to mitigate fall hazards include installing which of the following? A. Guardrails B. Walls C. Protective covers D. Parapets E. All of the above | E. All of the above |
OSHA requires fall protection at different heights for construction and general industry however, regardless of the fall distance, which of the following is most correct? A. Fall protection must be provided when working over dangerous equipment B. Fall protection must be provided when working over dangerous machinery C. Both A and B are correct D. None of the above | C. Both A and B are correct |
D-rings and snap-hooks must have a minimum tensile strength of: | 5,000 pounds |
Horizontal lifelines shall be designed, installed, and used under the supervision of a _ as part of a complete personal fall arrest system, which maintains a safety factor of at least two. | Qualified Person |
Preventing fall hazards is a critical part of the construction planning process. Controls to mitigate fall hazards include installing which of the following? A. Guardrails B. Walls C. Protective covers D. Parapets E. All of the above | E. All of the above |
Where there is no specific OSHA standard, employers must comply with the OSH Act’s: | General Duty Clause |
Typically, how long does an employee have to file a complaint with OSHA, when the employee has been discriminated against for reporting a safety or health hazard? | 30 days |
True or False: OSHA standards appear in the Code of Federal Regulations (CFR). | True |
True or False: A worker or worker representative can file a complaint about a safety or health hazard in the workplace. | True |
Employers covered by OSHA’s standards must display an “It’s the Law” poster. What does this poster address? | Safety and health information |
Which of following would be best to have when consulting a medical professional about possible exposure to a harmful chemical? | Safety Data Sheet for the chemical |
The CFR Parts, such as Part 1926 for Construction, are further broken down into _, which group together specific and detailed standards. | Subparts |
Which of the following is a type of OSHA violation? A. Repeat B. Serious C. Willful D. All of the above | D. All of the above |
Among the rights related to OSHA recordkeeping, workers have the right to review: | OSHA 300 Logs and OSHA 300A Summaries |
Who does OSHA recommend you first bring a workplace safety or health concern to? | Your employer |
True or False: OSHA standards fall into four categories (or Parts): General Industry, Construction, Maritime, and Agriculture. | True |
What type of OSHA inspection is conducted when immediate death or serious harm is likely? | Imminent danger |
True or False: You can request to remain anonymous when OSHA presents a complaint to your employer. | True |
The creation of OSHA provided this important right to workers: | The right to a safe and healthful workplace. |
OSHA requires that employers pay for which of the following personal protective equipment (PPE)? | Hard hats |
The right of workers to be safe and healthy while on the job, without fear of punishment is spelled out in: | Section 11(c) of the OSH Act |
When you’ve been assigned a new job or task, be sure to ask about the: | Written procedures and any additional training that may be required |
One of the main responsibilities employers have, as required by OSHA standards , is to: | Provide training |
What is OSHA’s mission? | To save lives, prevent injuries and protect the health of America’s workers. |
Which of the following is a way that an employee can contact OSHA? A. Email B. In person at a local office C. Phone D. All of the above | D. All of the above |
Which groups do NOT come under OSHA’s coverage? A. Public workers who are employed by state agencies B. Self-Employed workers C. Workers employed by construction companies D. Both A and B | D. Both A and B |
Workers must be trained in which of the following? A. Lockout/Tagout B. Fall Hazards C. Bloodborne Pathogens D. All of the Above | D. All of the Above |
The OSH Act covers: A. All private sector companies B. Manufacturing, Construction, longshoring, agriculture, law, and others C. The self employed D. Both a and b | D. Both a and b |
Which of the following industries has the highest fatality rate on an annual basis (1,100 workers per year)? A. The nuclear industry B. The oil refining industry C. The chemical manufacturing industry D. The construction industry | D. The construction industry |
State OSHA plans are plans authorized by Federal OSHA; what is true of these state operated plans? A. State plans are authorized by Federal OSHA B. State plans must be at least as stringent as the Federal requirements C. State plan programs respond to accidents and employee complaints, like federal OSHA D. All of the above | D. All of the above |
The Fat-Cat report refers to: | A table that contains the weekly summaries of fatalities and catastrophes |
SDS (safety data sheets) should contain: | chemical name, hazardous ingredients, physical + chemical characteristics, compatibility, etc |
What does NIOSH stand for? | National Institute for Occupational Safety and Health |
What does OSHA stand for? | Occupational Safety and Health Administration |
Check Also:
– OSHA 10 Construction Test Answers
– OSHA 30 Construction Test Answers
Leave a comment